ELTEX LTP-4X, Руководство по эксплуатации

Страница: 20 / 199

20
6.6 TX.
6.7 Not used.
6.8 Not used.
6.9 Not used.
Console cable pin assignment is shown in Appendix A—
Connector Assignment of RS-232 Null-Modem Cable.
6 F
A functional key that reboots the terminal and resets it to
factory settings:
–
press the key for less than 10 seconds to reboot the
terminal;
–
press the key for more than 10 seconds to reset the
terminal to factory settings.
7 GE Port 0..3
4 RJ-45 connectors of 10/100/1000Base-T Gigabit uplink
interface for connection to IP networks (for LTP-8X)
8 Combo GE
0..3
4 chassis for SFP modules of 1000Base-X uplink interface for
connection to IP networks (for LTP-4X)
4 RJ-45 connectors of 10/100/1000Base-T Gigabit uplink
interface for connection to IP networks (for LTP-4X)
4..7
4 chassis for SFP modules of 1000Base-X uplink interface for
connection to IP networks (for LTP-8X)
4 RJ-45 connectors of 10/100/1000Base-T Gigabit uplink
interface for connection to IP networks (for LTP-8X)
9 10G/1G 0..1
2 chassis for SFP modules of 10GBase/1000Base-X uplink
interface for connection to IP networks
10 PON
4 chassis for SFP modules of xPON 2.5 G (for LTP-4X)
8 chassis for SFP modules of xPON 2.5 G (for LTP-8X)
4 electrical Ethernet and 4 optical interfaces are combined (Combo GE 4..7). The
combo ports may have only one active interface at the same time.
6.2 Rear Panel
The rear panel of the terminal is shown in Fig. 6.4, Fig. 6.5, Fig. 6.6.