ELTEX LTP-4X, Руководство по эксплуатации

Страница: 53 / 199

53
LTP-8X(config)# ip snmp user "rwuser" auth-password "rwpass" enc-password "rwencr" access rw
LTP-8X(config)# ip snmp user "rouser" auth-password "ropass" enc-password "roencr" access ro
Step 3. Check the configuration
LTP-8X(config)# LTP-8X(config)# do show ip snmp users
SNMP users
~~~~~~~~~~
User name permissions
-------------------- ---------------
rwuser read-write
rouser read-only
2 SNMP users.
LTP-8X(config)#
The SNMPv3 agent supports authNoPriv and authPriv methods.
The encryption of the password performs according to the MD5 algorithm.
14.2 NTPD Configuration
The terminal has no integrated real-time clocks with a battery. For the events in system log to show
correct time and for automated operations to be performed in time, time synchronisation should be adjusted
with the help of the NTP protocol.
Step 1. Switch to the configure view.
LTP-8X# configure terminal
Step 2. Enable time synchronisation by using the ip ntp enable command. Specify the IP address to be
used for synchronisation in the ip ntp ip command.
LTP-8X(config)# ip ntp enable
LTP-8X(config)# ip ntp ip 192.168.1.254
Step 3. Specify the synchronisation interval in seconds by using the ntp interval command.
LTP-8X(config)# ip ntp interval 3600
Step 4. Use the ip ntp timezone and ip ntp daylightsaving commands to set the time zone of your region
and indicate whether it should be switched to the daylight-saving time.
LTP-8X(config)# ip ntp timezone 7
LTP-8X(config)# ip ntp daylightsaving