Eliet Edge Styler, Руководство пользователя

Страница: 43 / 76

43
English
• When driving the machine over a kerb or any descending or raised edge more than 10 cm high,
an intermediary step should be improvised by placing an object, preferably a rectangular bar,
in front of the edge. The object should be equal to half the rise height.
• The edge should be ascended going backwards, in which case the swivel caster should always
be tilted from the ground.
• Descents should always be approached going forwards. This gives you better control over the
machine, and it eliminates the possibility that the blade carriage’s drive belt will bump against
the ground.
• Carefully choose a clear and free transport path, preferably one with as few obstructions as
possible.
• The transport path should preferably be flat, with an even bottom.
• When moving in reverse with the machine, first always check to ensure that there are no ob
-
stacles that could cause an accident
• When loading the machine into a lorry or utility trailer, always use wide loading ramps with
plenty of friction. Ensure that the loading ramps are able to support the weight of both the
machine and the operator.
• Considering that the machine is supported on three wheels, planks of 250 mm each should be
used so that all three wheels can be supported when the planks are shoved together.
• Take care that the loading ramp is firmly connected to the vehicle or the utility trailer.
• If loading the machine onto a utility trailer, then the trailer itself should be hitched onto a vehi
-
cle.
• Make sure that the vehicle’s parking brake is on when loading and unloading the machine.
• Ensure that there is adequate space at the end of the loading ramp (4 m).
• Under no circumstances should the upwards slope exceed 15°.
• The machine weighs 90kg. Never attempt to lift and carry the machine without the assistance
of someone else (maximum load per person should be no more than 30% of any one person’s
individual body weight). Always request sufficient help from other persons.
• When lifting, grab the machine as closely to the body as possible and support the lift with the
leg muscles (drop the knees and lift with a straight back).
• Always properly secure the machine from moving before taking off. If the weight of the ma -
chine starts to shift in the vehicle, then this can lead to severe damage.
Caut ion :
Consciously handle the machine with care whilst loading and unloading so that
it does not tip over and lead to an accident.
War ning :
Never overestimate your own strength. Even lifting and carrying an overly
strenuous load for a few centimetres and releasing it quickly can cause severe
back pain.