Eliet Edge Styler, Руководство пользователя

Страница: 42 / 76

42
English
10. Transporting the machine
The machine is equipped with wheel drive, which can be used for transporting the machine to the
work zone or for loading the machine.
Even without the wheel drive, the machine should be smoothly transportable, given that its
wheels are equipped with roller bearings.
• It is preferred that the blade be disassembled (read § 11.4.2.5.). Doing so prevents the protrud -
ing blade from causing injury or damage.
• Only adults are permitted to move or transport the machine.
• Choose a clear and free transport path, preferably one with as few obstructions as possible. It
is highly recommended that the machine be transported on flat, solid ground.
• During transport, no children, unauthorised persons, or animals should be anywhere within a
3m radius of the machine (see § 7.3.5.: Danger zone).
• Never use the machine for transporting people or objects.
• If you would like to use the traction for transporting the machine between two different work
zones, then you should check to ensure that the blade arm has been positioned into transport
mode and that the blade has been disengaged.
• Never drive or place the machine on any floor or land surface that
cannot support the weight of the machine (> 90kg) plus one’s own
body weight.
• If you need to go over a dropped kerb, never permit the machine to
traverse the edge freely and uncontrolled. This can deform the wheel-
base or cause damage.
War ning :
Even though the machine seems small, do not underestimate its weight. The
machine weights approximately 90 kg. Never try to lift and carry the machine
alone. This can create severe back problems.
Caution :
A machine with running motor poses more of a risk than one with the motor
switched off. Ground-type permitting, and pending sound ergonomics, ELIET
recommends pushing the machine during transport.