manualshive.com logo in svg

Elettronica Santerno SINUS/ISD 200 S-0.75, Руководство пользователя, Страница: 57 / 206

Поделиться
Скачать
Elettronica Santerno SINUS/ISD 200 S-0.75 Скачать руководство пользователя страница 57

SINUS/ISD

15P0082B8

USER MANUAL

6 - 1/82

6.0

6.0

 

P

P

ROGRAMMING 

ROGRAMMING 

Y

Y

OUR 

OUR 

A

A

PPLICATION

PPLICATION

6.1

6.1

 

INTRODUCING THE MACRO

INTRODUCING THE MACRO

You can program the Inverter for specific applications.
The Inverter is supplied with macros (set-ups) which can be used as starting points for application-specific
programming. This programming could simply involve the inputting of parameter values, or it may require the
making or breaking of programmable links, which is a feature of this unit.
Each macro instantly recalls a pre-programmed set of default parameters when it is loaded.
Refer to Chapter 15: “Application Macros” for further information and Chapter 16 for programming examples.

6.2

6.2

 

 PROGRAMMING WITH BLOCK DIAGRAMS

 PROGRAMMING WITH BLOCK DIAGRAMS

Block diagram programming provides a visual method of planning the software to suit your application. There are
block diagrams provided at the end of this chapter, each showing the software connections for an application
macro.

The processes performed by a macro are represented as a block diagram, consisting of  

function blocks

 and

links:

•

 

Each function block contains the parameters required for setting-up a particular processing feature.
Sometimes more than one function block is provided for a feature, i.e. for multiple digital inputs.

•

 

Software links are used to connect the function blocks. Each link transfers the value of an output parameter
to an input parameter of another (or the same) function block.

Each individual block is a processing feature, i.e. it takes the input parameter, processes the information, and
makes the result available as one or more output parameters.

6.2.1

 

 MODIFYING A BLOCK DIAGRAM

6.2.1.1

 

  Configuration and Parameterisation Modes

There are two modes of operation used while modifying a block diagram:

Parameterisation

 and C

onfiguration

 modes.

The ENABLE CONFIG and DISABLE CONFIG commands, found under SYSTEM menu at level 1, is used to
toggle between these two modes of operation.

Parameterisation Mode

In parameterisation mode you can change parameter values. The Inverter can be running
or stopped. Note that some parameters can only be changed when the Inverter is stopped.
It is not possible to modify the internal links when the Inverter is in parameterisation mode.

Configuration Mode

In the configuration mode you can modify the links in the function block diagram. You can also change
parameter values, as above. This mode is indicated by all the LEDs on the operator station flashing at once. The
Inverter cannot run in this mode.

6.2.1.2

 

  Making and Breaking Links in Configuration Mode

Links can be moved, added or deleted from a block diagram whilst in the Configuration mode. There are 50 links
available, each has its own identification number (“link” number). You make a link by setting the link’s “source”
and “destination” tags to be the two parameter tag numbers for to be linked. The outputs of function blocks are
not updated whilst in this mode.

DEFAULT

Содержание SINUS/ISD 200 S-0.75















































































































































































































Отзывы:

Нет отзывов