Elettronica Santerno SINUS/ISD 200 S-0.75, Руководство пользователя, Страница: 130 / 206

15P0082B8
USER MANUAL
SINUS/ISD
6 - 74/82
Operation Operation Description Description
B <= A <= C
OUTPUT INPUT A
INPUT B
INPUT C
The OUTPUT is set to the
value of INPUT A, limited to
between a maximum value of
INPUT C and a minimum
value of INPUT B. If INPUT B
is greater than INPUT C the
output is undefined.
A>B+/-C
OUTPUT
INPUT A
INPUT B
INPUT C
The OUTPUT is TRUE if
INPUT A is greater than
INPUT B + INPUT C. The
OUTPUT is FALSE if INPUT
A is less than INPUT B -
INPUT C.
Otherwise the OUTPUT is unchanged. In this way the block acts as a
simple comparator with a comparison level of INPUT B and a
hysteresis band equal to +/- INPUT C.
A>=B
OUTPUT
INPUT A
INPUT B
The OUTPUT is TRUE if
INPUT A is greater than or
equal to INPUT B, otherwise
the OUTPUT is FALSE.
ABS(A)>
ABS(B)+/-C
OUTPUT
|INPUT A|
|INPUT B|
INPUT C
The OUTPUT is TRUE if the
magnitude of INPUT A is
greater than or equal to the
magnitude of INPUT B -
INPUT C.
The OUTPUT is FALSE if the magnitude of INPUT A is less than the
magnitude of INPUT B - INPUT C. Otherwise the OUTPUT is
unchanged. In this way the block acts as a magnitude comparator with
a comparison level of INPUT B and a hysteresis band equal to +/-
INPUT C.
ABS(A)>
=ABS(B)
OUTPUT
|INPUT A|
|INPUT B|
The OUTPUT is TRUE if the
magnitude of INPUT A is
greater than or equal to the
magnitude of INPUT B,
otherwise the OUTPUT is
FALSE.
A(1+B) The OUTPUT is set to INPUT A + ( INPUT A * INPUT B / 100.00 ).
IF(C) HOLD A If INPUT C is zero, the OUTPUT is set to INPUT A, otherwise the
OUTPUT is unchanged.
On powering up the drive, the output will be pre-loaded with the last
saved value of input B.
BINARY
DECODE The OUTPUT is set according to which of the INPUTs are non-zero.
INPUT C
INPUT B INPUT A OUTPUT
0 0 0 0.00
0 0
≠
0 0.01
0
≠
0 0 0.02
0
≠
0
≠
0 0.03
≠
0 0 0 0.04
≠
0 0
≠
0 0.05
≠
0
≠
0 0 0.06
≠
0
≠
0
≠
0 0.07
In the above table,
≠
0 indicates that the corresponding input is not
zero.