manualshive.com logo in svg

Electrolux 30" GAS FREESTANDING RANGES, Руководство по обслуживанию

Поделиться
Скачать
Electrolux 30

77

2. Arrange oven rack and place the pan on the oven

rack. Be sureto center the broiler pan directly under
the broil burner. 

Close the oven door when

broiling.

3. Press 

Broil

. “

BROIL

” will flash and “

—°

” appear in

the display.

4. Press  5   5   0. “

BROIL

” will flash and “

550°

” appear

in the display.

5. Press 

Start

. The oven will begin to broil. “

BROIL

”

and “

550°

” appear in the display.

6. Broil on one side until food is browned; turn and

cook on the second side. Season and serve.

Note: 

Always pull the rack out to the stop position before

turning or removing food.

7. The “

BROIL

” light in the display will stay.

8. To cancel broiling or when broiling is complete press

Clear Off

.

Convection Bake:

To Set the Convection Bake Temperature to 350°F:

1. Arrange oven racks and place food in oven.

2. Press 

Conv Bake. “CONV BAKE” 

icon will flash

and 

“—°” 

will show in the display.

3. Press  3    5    0 . 

“CONV BAKE “ 

icon will flash and

“350°” 

will show in the display.

4. Press 

Start

. The “

CONV BAKE

” icon will remain on.

Also the 

“350°”

oven temperature and the oven icon

will show in the display.

Note:

 The convection fan will come on a short time after

the oven has been set for Convection Bake. The oven
icon display will begin rotating indicating that the
Convection Fan is operating.

5. Press 

Clear Off

 to stop baking or cancel bake at

any time.

Setting Food Catagory Feature:

The 

Meats

, 

Cakes

, and 

Breads

 pads in the food

catagories have been designed to give optimum
performance for the foods selected in each catagory.

The 

Meats

 pad combines a cook cycle with the

convection fan and element to roast meats and poultry.
Preheating is not necessary for meats and poultry.
Heated air circulates around the food from all sides,
sealing in juices and flavors.  Foods are crispy brown on
the outside while staying moist on the inside.

The 

Cakes

 pad provides a preheat with a gentle cycling

of heat, giving cakes more volume and allowing delicate
foods to cook more evenly.  Cook times may need to be
extended when baking 4 cake layers at one time.

The 

Breads

 pad adds a preheat feature to the bake cycle

to thoroughly heat the oven from top to bottom to give
more evenly browned food.

To set the Food Catagories Feature (example Meat
to Cook at 350°F):

1. Arrange interior oven racks and place food in oven.

2. Press 

Meat

 pad.  “

MEATS

” will flash and “--” will be

displayed.

3. Press 3  5  0.  “

MEATS

” will flash and “

350°

” will

appear in the display.

4. Press 

Start

.  “

MEATS

” and “

350°

” will appear in the

display and the convection fan icon will come on.

Press 

Clear Off

 to stop cooking or to cancel cooking

Meats, Cakes, or Breads at any time.

Self-Clean:

When planning to use the oven directly after a self-clean
cycle remember to allow time for the oven to cool down
and the oven door to unlock. This normally takes about
one hour. So to self-clean for 3 hours will actually take
about 4 hours to complete.

*

We recommend a 2 hour self-clean cycle for 

light soils

,

a 3 hour cycle for 

average soils

, and a 4 hour cycle for

heavy soils 

(to assure satisfactory results).

During the self-cleaning cycle, the outside of the range
can become very hot to the touch. 

DO NOT 

leave

small children unattended near the appliance; they may
be burned if they touch the hot oven door surfaces.

DO NOT 

force the oven door open. This can damage the

automatic door locking system. Use care when
opening the oven door after the self-cleaning cycle. Stand
to the side of the oven when opening the door to allow
hot air or steam to escape. The oven may still be VERY
HOT.

Содержание 30" GAS FREESTANDING RANGES





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды