manualshive.com logo in svg

Electrolux 30" GAS FREESTANDING RANGES, Руководство по обслуживанию

Поделиться
Скачать
Electrolux 30

123

 

Wool shield sscrews

Glass package

1. Remove the wool shield, lift the wool out, and remove

the four screws holding the glass package to the
inner door liner.

            

Glass package

Inner door liner:

1. With the glass package and door seal removed, the

inner door liner is left.

Oven door springs:

Door spring

1. The oven door springs are connected on one end to

the oven door cam and on the other to the bottom
rail of the range.

2. To remove the spring, remove the drawer and with

the oven door closed, disconnect the spring from
the hinge and disconnect the spring from the rail.

Oven door hinge:

1. Remove the door spring and the door.

2. Remove the three screws holding the door hinge to

the front frame and pull the hinge out of the front
frame.

 

Door hinge screws

Storage drawer:

1. To remove the storage drawer pull the drawer out to

the stop, lift up on the drawer and pull out.

Storage drawer handle:

1. The drawer handle is held to the drawer panel by

two bolts and nuts. to remove the handle unscrew
the nuts and pull the handle off.

 

Drawer handle nuts

Содержание 30" GAS FREESTANDING RANGES





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды