Electrolux 30" GAS FREESTANDING RANGES, Руководство по обслуживанию

Страница: 73 / 132

73
THE ES 450 ELECTRONIC CONTROL SYSTEM
The ES 450 electronic oven control system is used to
control the oven on self-cleaning model ranges that have
the convection and pre-programmed features.
HOW TO PROGRAM THE ES 450
The oven can be programmed to: BAKE, TIME
BAKE, BROIL, CONVECTION BAKE, SELF-CLEAN,
CONTINUOUS BAKE, PREPROGRAM FUNCTIONS
and SET FOR OVEN LOCKOUT.
Clock:
The clock may be set for 12 or 24 hour time of day
operation. The clock has been preset at the factory for
12 hour operation. When the range is first plugged in, or
when the power supply to the range has been interrupted,
the timer in the display will flash and
PF (power failure)
will appear in the display.
To set the Clock (example 1:30):
1. Press Clock . “ CLO ” will appear in the display.
2. Press the numbers 1 3 0 to set the time of day to
1:30. “ CLO ” will disappear after 4 seconds and the
clock will start. Or, you may press Start . “ CLO ” will
disappear.
Changing between 12 or 24 hour time of day display:
1. Press and hold Clock for 6 seconds; a beep will
sound.
2. The display will show 12:00 to indicate the 12 hour
time of day operation is active.
3. Press Clean to toggle between the 12 and 24 hour
time of day display. The display will show either
12:00 or 24:00 .
4. Press Start to accept the change or press Clear/
Off .
5. Reset the correct time as described in To set
the Clock
.
Please note that if the 24 hour time of day mode was
choosen, the clock will now display time from 0:00 through
24:00 hours.
Continuous Bake or 12 Hour Energy Savings:
The oven control has a factory preset built-in 12 Hour
Energy Saving feature that will shut off the oven if the
oven control is left on for more than 11 hours and 59
minutes. The oven can be programmed to override this
feature for continuous baking.
To set the control for continuous bake or 12 Hour
Energy Saving
1. Press and hold Timer On/Off for 7 seconds, “:—”
or “ :24 ” will appear in the display and the control will
beep once.
2. Press Clean to toggle between the 12 Hour Energy
Saving and continuous bake features.
Note: “ 12 ” in the display indicates the control is set for
the 12 Hour Energy Saving mode and “--” indicates the
control is set for the continuous bake feature.
3. Press Start to accept the change or press Clear/
Off to reject the change.