Electrolux 30" GAS FREESTANDING RANGES, Руководство по обслуживанию

Страница: 39 / 132

39
SECTION C - ELECTRONIC CONTROL
SYSTEMS
This manual will cover six electronic oven control
systems.
1. ES 100
2. ES 200
3. ES 300
4. ES 400
5. ES 450
6. Control for 36” self-cleaning gas ranges.
THE ES 100 ELECTRONIC CONTROL SYSTEM
The ES 100 electronic oven control system is used to
control oven on non self-cleaning model ranges.
HOW TO PROGRAM THE ES 100
To Set the Clock:
When the range is first plugged in, or when the power
supply to the range has been interrupted, the display will
flash "12:00".
1. Press Clock Set .
2. Within 5 seconds, press and hold the Up Arrow or
Down Arrow until the correct time of day appears
in the display.
To Set the Minute Timer:
1. Press Timer ON/OFF .
2. Press the Up Arrow to increase the time in one
BAKE
BROIL
TIMER
ON/OFF
CLOCK
SET
CLEAR
OFF
minute increments. Press and hold the Up Arrow
to increase the time in 10 minute increments. The
timer can be set for any amount of time from 1 minute
to 11 hours and 59 minutes.
Note: If you press the Down Arrow first, the timer
will advance to 11 hours and 59 minutes.
3. The display shows the timer count down in minutes
until one minute remains. Then the display will count
down in seconds.
4. When the set time has run out, the timer will sound
a 3 second beep. 0:00 will appear in the display until
Timer ON/OFF is pressed.
Note: While the minute timer is counting down, the “:” will
flash. The minute timer does not start or stop cooking.
It serves as an extra timer in the kitchen that will beep
when the set time has run out. The minute timer can be
used alone or during any of the other oven functions.
When the minute timer is in use with any other function,
the minute timer will be shown in the display. To view
other functions, press the pad for that function.
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, press
and hold the
Up Arrow or Down Arrow to increase or
decrease the time.
T
o Cancel the Minute Timer before the set time has
run out:
Press Timer ON/OFF .
To Set or Change the Temperature for Baking:
The oven can be programmed to bake at any temperature
from 170°F to 500°F.
To Set the Controls for Baking:
1. Press Bake . "— — —°" appears in the display.
2. Within 5 seconds, press the Up Arrow or Down
Arrow . The display will show "350°F." By pressing
and holding the Up Arrow or Down Arrow , the
temperature can then be adjusted in 5°F increments.
3. When the Up Arrow or Down Arrow is released,
the oven will begin heating to the selected temperature.
When the displayed temperature reaches the desired
baking temperature, the control will beep 3 times.
4. To cancel the baking function, press Clear Off .