Electro Industries/GaugeTech Shark 100T Скачать руководство пользователя страница 285

Страница: 285 / 322

Doc

E154713

D-5

D: Using SNMP

Electro

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

Electro

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

• The Implemented Network MIBs are:

• System Group - provides information such as computer/equipment location,

contact person, etc.

• The following MIB items from the System Group can be modified by an

SNMP manager browser. These are the only modifiable items in the
meter’s SNMP configuration:

• system.sysContact

• system.sysName

• system.sysLocation

• Modifications to these items are stored in a file, so that the modified

values will be retained through a meter reboot.

• Interface Group - provides information about the hardware interfaces, i.e.,

device name, type, MTU, Ethernet address, statistics etc.

• Cidr Group - provides information about the IP Routing Table. The Routing Table

provides information on interface and IP address to send a packet to.

• Internet Protocol (IP) Group - provides interface information and statistics which

include the following Tables:

• Internet Address Table: lists IP addresses, information and statistics.

• Address Translation Table: ARP cache, i.e., IP to Ethernet address transla-

tion.

• Default Router Table: default routes in routine table which is used when

sending packets.

• ICMP Statistics.

• TCP Group - provides TCP statistics as well as TCP socket listener and connection

information.

• UDP Group - provides UDP statistics as well as UDP socket connection informa-

tion.

Содержание Shark 100T



































































































































































































































































































































Результаты поиска

Содержание Shark 100T

Отзывы:

Electro Industries/GaugeTech Shark 100T, Руководство по установке и эксплуатации, Страница: 285 / 322

Результаты поиска

Содержание Shark 100T

Отзывы: