Electro Industries/GaugeTech Shark 100T Скачать руководство пользователя страница 153

Страница: 153 / 322

Doc

E154713

9-3

9: Network Communications

Electro

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

Electro

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

1. From the Device Profile screen, double-click

General Settings> Communica-

tions

, then double-click on any of the ports. The Communications Settings screen

opens.

2. In the Network Settings section enter the following data.

NOTE:

The settings shown below are the default settings of the main Network

card. See Chapter 11 for the default settings of optional Network card 2.

• IP Address: 10.0.0.1

• Subnet Mask: 255.255.255.0

• Default Gateway: 0.0.0.0

NOTES

•You can use different settings for the main Network card (check with your

Network Administrator for the correct settings).

•We recommend that the main Network card and Network card 2 be in

different subnets, though this is not a necessity.

3. Once the above parameters have been set, Communicator EXT

software connects

via the network using a Device Address of "1" and the assigned IP Address when
you follow these steps:

a. Open Communicator EXT

software.

b. Click the

Connect

icon in the icon tool bar. The Connect screen opens.

c. Click the

Network

button at the top of the screen. Enter the following informa-

tion:
Device Address:      1
Host:                     The Network card’s IP Address
Network Port:         502
Protocol:               Modbus TCP

d. Click the

Connect

button at the bottom of the screen. Communicator EXT

software connects to the meter via the network.

Содержание Shark 100T



































































































































































































































































































































Результаты поиска

Содержание Shark 100T

Отзывы:

Electro Industries/GaugeTech Shark 100T, Руководство по установке и эксплуатации, Страница: 153 / 322

Результаты поиска

Содержание Shark 100T

Отзывы: