RGK02
Operating Instructions
23
4.2.6
Send signal
Data type
1 bit
Number of objects
4
(A) signal, (B) signal,
(C) signal, (D) signal
Optional objects
none
Object behaviour
upon receiving
(A):
(A=[1]|[0])
(C): (C=[1]|[0])
(B):
(B=[1]|[0])
(D): (D=[1]|[0])
Parameters
Signal type
[0] or [1]
Four 1-bit objects (one object for each keycode) are generated in this operating mode.
This operating mode allows you to send [1] or [0] to the KNX bus. The command is
triggered with each keycode (A, B, C or D) of a programmed Easywave serial number.
Per programmed Easywave serial number, you can now send either [1]
or
[0] to the
bus. All keycodes always send the same value to the KNX bus, but are represented by
different group objects.
After pressing the corresponding button of a programmed transmitter, the ob-
jects/functions are transferred to the KNX bus by the gateway.