RGK02
Operating Instructions
12
3.4
Programming the physical address
An unequivocal physical address must be assigned to the newly created gateway in the
KNX bus system.
1. Right-click on the menu item "Pro-
gram" in the menu "Topology". The
"Program" window appears.
2. To program the physical gateway
address, click on the button "Program
phys. address".
3. The programming procedure starts
and you will be prompted to press the
programming button of the gateway.
The red LED goes off after approx. 4
seconds and the physical address is
now programmed.
xx / dacb / xxxxxx
868,3 MHz
RGK02-5023E-01
.0-01
Bereich:
Linie:
Teilnehmer-
nummer
