RGK02
Operating Instructions
22
Optionally, you can define only a short
or
only a long-time command for the buttons
A/B, which is then executed directly. This way it is not necessary to press a button for
1.6 s to trigger a long-time command.
In addition, it is also possible to define both another short and a long-time object for the
send code C/D OR a separate STOP command (C only). By default, this option is set to
"no utilisation".
After pressing the corresponding button of a programmed transmitter, the functions are
transferred to the KNX bus by the gateway.
4.2.5
Setting a value
Data type
1 byte
Number of objects
1
(A) value A
Object behaviour
upon receiving
(A):
(A=[VALUE])
Parameters
Value in %
Adjustable in 5%-steps
This operating mode allows you to send a value in percent in a range from 0% to 100%
to the KNX bus. The value can be selected in 5%-steps.
The command is uniquely triggered by keycode A of the programmed send telegram.
After pressing the corresponding button of a programmed transmitter, the function is
transferred to the KNX bus by the gateway.
