RGK02
Operating Instructions
21
After pressing the corresponding button of a programmed transmitter, the functions are
transferred to the KNX bus by the gateway.
4.2.4
Shutters
Data type
1 bit
Number of objects
2
(A/B) shutter short-time; (A/B) shutter long-
time;
Optional objects
3
(C) shutter stop; (C/D) shutter short-time;
(C/D) shutter long-time
Object behaviour
upon receiving
Short-time object: Press button < 1.6s
(A/B):
(A=[0]; B=[1])
(C):
(C=[0])
(C/D):
(C=[0]; D=[1])
Long-time object: Press button > 1.6s
(A/B):
(A=[0]; B=[1])
(C/D):
(C=[0]; D=[1])
Parameters
Shutter com-
mand
Button C
Long-time command; short-time command;
short and long-time command
Extra stop command; additional short and
long-time command; no utilisation
This operating mode serves to address KNX shutter actors.
A short-time object A/B and a long-time object A/B are generated by default, whereby
[0] is sent when receiving a keycode A and [1] when receiving a keycode B to the re-
spective group objects of the KNX bus.
In the operating mode [short and long-time command], the system evaluates PRIOR to
triggering the KNX command whether the respective object is a long or a short-time
object. Pressing the button for <1.6 s is interpreted as a short-time command, pressing
the button for >1.6 s as a long-time command.
