RGK02
Operating Instructions
26
4.3.2
2-button operation
Data type
1 bit
Number of objects
2
(A/B) 2- (C/D) 2-button
Object behaviour
at [0]
Sending of [B] or [D]
at [1]
Sending of [A] or [C]
Easywave operating
modes
ON/OFF (2-button operation)
UP/DOWN (2-button operation)
Two objects (A/B and C/D) are generated in this operating mode for the respective
channel.
These represent the keycodes (A/B) or (C/D) of one Easywave serial number.
If an assigned KNX sensor is operated, the gateway sends the respective send code.
If the KNX bus receives a [1], the keycode A or C is sent out depending on the selected
object. When receiving a [0], the keycode B or D is sent analogue.