RGK02
Operating Instructions
28
4.3.4
Deadman
Data type
1 bit
Number of objects
4
(A) deadman, (B) deadman,
(C) deadman, (D) deadman
Object behaviour
at [0]
Stop sending
at [1]
Start sending the respective keycode for
the set duration
Easywave operating
mode
Deadman
Parameters
Deadman
duration
[1-31] in seconds
In this operating mode, four 1 bit objects are created for the respective channel. These
represent the keycodes A, B, C and D of an Easywave send code.
If an assigned KNX sensor is operated, the gateway sends the corresponding send
code for the duration the button is pressed, however at most up to the set send dura-
tion.
IMPORTANT!
The KNX sensor must be configured in such a way that it sends [1] when oper-
ated and [0] when released to the KNX bus and/or to the respective group object!
Automated permanent transmission is not admissible!
