RGK02
Operating Instructions
19
After pressing the corresponding button of a programmed transmitter, the functions are
transferred to the KNX bus by the gateway.
A corresponding 4-channel transmitter is required to be able to use all four objects of a
channel.
4.2.2
Switch
Data type
1 bit
Number of objects
2
(A/B) switch, (C/D) switch
Object behaviour
upon receiving
(A/B): (A=[1]; B=[0])
(C/D): (C=[1]; D=[0])
In this operating mode, two 1-bit objects are created for the respective channel. These
represent the keycodes A, B, C and D of
one
Easywave serial number.
If the keycode A or C is received, the gateway sends [1] to the respective group objects
of the KNX bus. If the keycode B or D is received, the gateway sends [0] to the respec-
tive group objects of the KNX bus.
After pressing the corresponding button of a programmed transmitter, the functions are
transferred to the KNX bus by the gateway.
A corresponding 4-channel transmitter is required to be able to use all four objects of a
channel.