RGK02
Operating Instructions
15
4.1.2
Deleting a channel
The system object 642 serves for deleting specific Easywave send codes.
Direct deletion of a send code is initiated by sending the value for the memory slot (1-
128) to the corresponding group object.
1. Open the group monitor (menu
Diagnosis/Group telegrams)
and click on Read/send.
2. In the menu "Read/send values",
enter the group address of the sys-
tem object "Delete channel" (in this
case 1/1/2).
3. In the field "Value" enter the mem-
ory slot number to be deleted and
click on "Write".
4. The corresponding memory slot is
deleted and the gateway will no
longer react tot he corresponding
transmitter.
5. Repeat these steps for each addi-
tional channel to be deleted.