RGK02
Operating Instructions
16
4.1.3
Delete all channels
The system object 643 serves for deleting all programmed Easywave send codes.
Deletion of all send codes is initiated by sending [1] to the corresponding group object.
1. To do so, open the group monitor (menu
Diagnosis/Group telegrams) and clock
on Read/send.
2. In the menu "Read/send values",
enter the group address of the sys-
tem object "Delete all transmitters"
(e.g. 1/1/3).
3. Change the value to [1] and click
on "Write"
4. Now all send codes are deleted
and the gateway will no longer re-
act to radio signals until new
transmitters are programmed.
ATTENTION!
There is no prompt for confirmation! All transmitters are permanently deleted!
A restoration of the assignment is not possible.
Therefore, only assign a group address to object 643 if you really need it and then de-
lete the group address again!
