RGK02
Operating Instructions
14
4.1.1
Teaching in a channel
The system object 641 serves for teaching in Easywave send codes.
The teach-in process is initiated by transmitting the desired memory slot number (value
from 1 to 128) to the respective group object.
1. Open the group monitor (menu
Diagnosis/Group telegrams)
and click on Read/send.
2. In the menu "Read/send values",
enter the group address of the sys-
tem object "Teach in channel" (e.g.
1/1/1).
3. In the field "Value" enter the de-
sired memory slot number and click
on "Write". Please note that the
number of the memory slot repre-
sents the assignment to the corre-
sponding receive object at the
same time (see point 4.3.2)
4. The LED on the gateway lights up
red. Now press the desired trans-
mitter.
Once the teach-in process is com-
pleted, the LED goes off.
5. Repeat these steps for each addi-
tional transmitter.
ATTENTION!
If you teach in a transmitter double on a memory slot (value), the already programmed
send code is overwritten.
If you teach in the same transmitter on different memory slots, the gateway will only
execute the function of the lowest channel.