ELABO G7-1G, Руководство по эксплуатации

Страница: 94 / 139

94
11. Test parameter
Fig. 11.1a: HV test parameters 1
Combi-tester G7-1G/-1H/-1T/-1U
11 Test parameters
11.1 Parameters for high voltage test
On this menu the settings for the HV tests are made. Depending on which
device variant you have, some of the parameters given in the following
may not be available or it may not be possible to edit some parameters.
The values entered are changed in the parameter set currently open. The
parameters in the following relate to the AC standard device.
In case of devices with options fitted, the parameters may vary. On this
topic see chapter "Options".
Test mode "HV / ISO / PE / Time / Burn"
HV
- HV-test with AC voltage max. 5000 V /max. 200 mA.
ISO
- Insulation-test with DC voltage 1200 V max. 1000 MOhm.
PE -
protective earth conductor test
with AC voltage 6/12 V / 5 ...
32 A / 0 ... 1200 mOhm.
Burn (option) - HV-test with AC voltage max. 5000 V with the maximum
of test current. The over current tripping is not active.
Time - Wa i t i n g t i m e s t e p , e g . t i m e t o d i s c h a r g -
ing the test object past a HV test.
Voltage range "low / high"
low - test voltage max. 100 .... 2500 V AC
high - test voltage max. 200 .... 5000 V AC
Test voltage "0.01 ... 5.0 kV AC" - set the test voltage for the HV-test .
Run up (on/off) - activates the ramp-up function of the test voltage.
test mode ..............
voltage range
test voltage (kV)
run-up (kV/s) 0,5
1,5
low
HV

HV 1500 AC