ELABO G7-1G, Руководство по эксплуатации

Страница: 16 / 139

16
2. SAFETY REGULATIONS
2.8 Maintenance
- The stipulated maintenance and inspection work is to be performed at
the intervals defined.
- Inform operators prior to starting maintenance and service work.
- During all maintenance and inspection work, electrically isolate the device
/ system and secure against unexpected switch on.
- The work is only allowed to be undertaken by appropriately trained per-
sonnel, all safety precautions are to be taken.
- To perform maintenance and servicing work, workshop equipment ap-
propriate for the work to be performed is imperative!
2.9 Moisture and humidity
- The parts of the system are not allowed to be subject to moisture, hu-
midity and/or dust.
- Particularly the electrical parts and the test mechanism and test sensors
for the system must be protected against moisture, humidity and dust.
2.10 Compliance with the technical data
- The technical performance data as per the name plate must not be ex-
ceeded.
- The fuse protection for the supply cables must not be higher than the
max. value defined by ELABO.
2.11 Physical/design changes to the system/device
Without the prior written approval of ELABO, it is not allowed to make
changes, additions or modifications to the system. If this instruction is not
followed, the device/machine/system will lose its EC conformity.
- Immediately replace additional parts and accessories that are not in
correct working condition.
- Only use genuine spare parts. Only these comply with the technically
defined requirements.
2.12 Other information
Escape routes: The escape routes are to be kept clear.
In accordance with UVV „Elektrische Anlagen und Betriebsmittel“
(Electrical systems and equipment) (BGV A2) §2, paragraph 3 the
term Elektrofachkraft (electrician) is defined as followed (translation of
the original German text):
An electrician in the context of the prevention of accidents is a person
who, due to his/her specialist training, knowledge and experience, as well
as knowledge of the application regulations is able to assess the work
allocated and recognise possible hazards.
Combi-tester G7-1G/-1H/-1T/-1U