ELABO G7-1G, Руководство по эксплуатации

Страница: 90 / 139

90
10. Menu System
measurement, test voltage not reached, etc.)
fault at: bonding, manual time out, mains inverse polarity,
mains supply not within tolerance.
Buzzer volume - Loudness of the buzzer in percent.
Passwords - Activate and change Passwords for the levels 1, 2, 3 (as-
signments of the password steps and predefined passwords - see Chapt.
3.9). The passwords for the layers are individually set able.
Note: For activating the menu "Settings - Password" the level-3 password
for "Settings" is necessary.
Test- level-1
• Enter the new password for Test (see Chapt. 3.9).
• Accept the new password by using the "save"- button.
The new password is now active.
Parameter - level-2 / Setup - level-3
Enter the passwords for "Parameter" and Setup" in the same way
then "Measure".
Pass words activ
inactive - no password is active.
active
- passwords active. For starting a new function, it is neces-
sary to enter the password.
Note - Pass words lost: Request the ELABO service for a "mas-
ter passwords". By using the master password it is possible to
unlock the device.
Device information - Shows the device number, the software version and
the integrated hardware of the device.
Cabinet impuls
Off - operation without test cabinet.
On - for ELABO 93-4B series test cabinet. The device device
sends a pulse to the test cabinet and as a result opens the
lock. The pulse is generated at the end of the test time or after
a „reset“. This is necessary if the device is used in conjunc-
tion with an ELABO 93-4B series test cabinet. The test time is
increased by approx. 250 ms as a result.
Combi-tester G7-1G/-1H/-1T/-1U