KGL Operating Manual – VS 3010 BS
2018-07-02
/
122 178
The system centre only emulates the "hardware front" of its "store computer" predecessor or of the operator
terminal by software on its touch screen which is demonstrated by the following comparison between the
terminals of the CI 4x00 and CI 3x00 / AL 300:
(1) CI 4x00:Button "Alarms and messages" in the main menu to display whether alarms are pending. Alarms
are acknowledged in the "alarm list".
CI 3x00 / AL 300: red LED signal lamps to indicate whether alarms are pending.
(2) CI 4x00: "Horn" button in the main menu for muting of the buzzer and for reset of the AUX relay.
CI 3x00 / AL 300: button for muting of the buzzer, for reset of the AUX relay* and for acknowledgement of
alarms.
(3) Display (4 lines x 20 characters) for display of the menu of the controller.
(4)
button
ESC
(5) Cursor buttons
(6)
button for, e.g. toggle upper case / lower case for text input.
MODE
(7) Alphanumeric keypad
(8)
button (
)
ENTER
Only CI 3x00 / AL 300:
(9) On/Off button for, e.g. lighting
(10) Green LED signal lamp for status indicator whether the button is activated (then green) or deactivated.
8.2.1 Menus and operating screens
If the system centre, store computer or operator terminal remain locked down, settings on the
controller are read-only. Changes and inputs are not possible. However, if any parametrisation is
required, the lock-down for the input must be removed first, see
Cancelling entry block, page 127
Numbering of menus and screens
