EPX400-A20CU – Manual
Page 32 / 62
o
To OSM.Server is sent information abort the occurrence of the event and the
number of occurrences without giving a time (eg. A violation of input 2: 14
times).
o
Events may be sent not in chronological order, even though the transmiter is
trying to send earlier, the events which occurred first.
o
Command FLUSH=0, deletes only the events stored in the volatile memory
and generates the event EVENT_FIFO_FLUSHED.
Regardless of choosing the option “Enable non-volatile events FIFO”:
o
If in the memory are unsent messages from the control panel and the memory
will be disabled by changing the configuration, unsent events can be sent
when the memory will be enabled again.
Memory related events:
o
EVENT_FIFO_FAILURE – when queue is damaged.
o
EVENT_FIFO_OVERFLOW – when queue is overflowed.
o
EVENT_FIFO_FLUSHED – when queue is cleared by remote command
FLUSH=0.
By default, they have the SMS and LTE/HSPA+ authorization flag set for sending to
OSM.
8.3.
PARTITIONS
Using partitions you may configure which inputs will be monitored depending on
state of one of the inputs (arming). If arming input is not active then all changes of
the state of the input assigned to partition will be ignored. For the active arming
input all changes of the state of the input assigned to partition will be monitored and
processed in a normal way.
Arming dalay (time for exit)
8.3.1.
After clicking on this option, additional list will show, where you can set the time for
exit. Partition inputs will be monitored when this configured time elapses after
partition input had been armed.
