EPX400-A20CU – Manual
Page 24 / 62
communicator into the programming mode (only MINI-PROG-BT
automatically
switches to programming mode). By clicking “Read configuration” button, you can
start downloading the settings saved in the communicator’s memory, with a message
bar containing successful/failed reading shown at the bottom of the app. Data
downloaded from the device can be stored and used later for other devices.
Write configuration
7.5.6.
This function is similar to the above, but it allows you to send settings and
configuration to the device memory (select Settings and system config” option). You
can also set the date and internal clock for the device (use field “Device time and
date”). By clicking “Send” button, you can start sending the defined data, with a
message bar containing successful/failed sending information shown at the bottom of
the app.
