![background image](http://html1.mh-extra.com/html/eaton/roadranger-trsm4106/roadranger-trsm4106_service-manual_2353178086.webp)
5/01
4/51
40. Apply the specified sealant and install a new
expansion plug in the reverse idler shaft bore.
41. Install the reverse idler gear/PTO cover plate.
Tighten the capscrews to the correct torque (35 to
39 Nm).
42. Turn the transmission to the horizontal position.
Rotate the selector block to position the pin upper-
most.
43. Install the selector detent plunger and spring, fit
the cover plate with a new gasket and tighten the
capscrews to the correct torque (20 to 24 Nm) or
install neutral detent assembly (32 to 37 Nm).
Or install neutral detent assembly (32 to 37 Nm).
39. Ensure that the thrust washers and the gear
are correctly positioned. Drive the shaft into posi-
tion ensuring that the end of the shaft is just below
the surface of the case.
Reverse Idler - New Design
38. Install the reverse idler gear/PTO cover plate.
Tighten the capscrews to the correct torque (35 to
35 Nm). Apply sealant to the expansion plug in the
reverse idler bore. Fit the expansion plug.
Содержание Roadranger TRSM4106
