![background image](http://html1.mh-extra.com/html/eaton/roadranger-trsm4106/roadranger-trsm4106_service-manual_2353178068.webp)
5/01
4/33
3. Assemble the puller over the 5th/6th gear syn-
chroniser hub and the 5th gear synchroniser ring,
taking care not to damage the teeth of the latter.
Pull off the hub, cone and ring.
(On an overdrive transmission it may be necessary
to engage the puller over 6th gear also.)
4. Lift off the 5th gear and 5th gear needle roller
bearing. (On overdrive transmissions this will be
6th gear.)
5. Carefully remove the 4th gear bearing sleeve
retaining snap ring.
6. Invert the shaft assembly and using a suitable
puller under the reverse gear remove the gear,
thrust washer and bearing track. Remove the
reverse gear needle roller bearing.
7. Remove the reverse gear fixed hub retaining
snap ring.
8. Using a press of suitable puller, pull off 1st gear
assembly and the reverse gear fixed gear hub.
Содержание Roadranger TRSM4106
