![background image](http://html1.mh-extra.com/html/eaton/roadranger-trsm4106/roadranger-trsm4106_service-manual_2353178030.webp)
5/01
3/6
10. Install the reverse detent plunger and spring
and fit the cover using a new gasket. Tighten the
capscrews to the correct torque (20 to 24 Nm).
11. Fit the rubber boot onto the housing. Align the
outer lever with the timing mark on the shaft. Fit
the pinch bolt and tighten to 35 to 39 Nm.
13. Apply Loctite 5900 sealant.
Fit control assembly to the transmission housing.
12. Fit the breather. Install the pin and neutral
switch (15 to 22 Nm). Apply sealant and install a
new blanking plug.
Содержание Roadranger TRSM4106
