![background image](http://html1.mh-extra.com/html/eaton/roadranger-trsm4106/roadranger-trsm4106_service-manual_2353178073.webp)
5/01
4/38
17. Fit the spacer on the standard cylindrical roller
or 4 point ball bearing. If integral spacer bearing is
fitted the spacer is part of the bearing inner race.
18. Take the heated inner track of the mainshaft
rear bearing and fit it over the shaft, flange inner-
most against the spacer. Use a soft drift or flanged
driver if necessary to ensure that the bearing is
fully home against the shoulder.
Note:
When cooled, the bearing track should be
sufficiently tight on the shaft to retain the reverse
gear on the shaft.
19. Invert the shaft in the vice. Lubricate and install
the 3rd bearing and 3rd gear assembly.
20. Install the 3rd gear synchroniser ring over the
flange.
21. Take the heated 3rd/4th gear synchroniser hub
and fit it over the splines on the shaft ensuring that
the large slots in the hub align with the large shoul-
ders on the synchroniser ring. Use a soft drift or
flanged driver if necessary to ensure the hub is
fully home. Recheck that the shoulders are in the
correct slots
22. Check that the gear end float is within the toler-
ance stated in the chart.
Содержание Roadranger TRSM4106
