![background image](http://html1.mh-extra.com/html/eaton/roadranger-trsm4106/roadranger-trsm4106_service-manual_2353178045.webp)
5/01
4/10
Layshaft Reassembly
1. Heat the layshaft taper roller bearing inner races
to 85¡¡C (180¡F). Support the shaft assembly for-
ward end uppermost and place the heated inner
cone and roller assembly onto the shaft. Use a
suitable mandrel to make sure bearing is fully
home.
2. From the range of graded fit circlips, select the
circlip which fits into the groove with the minimum
free play.
Part No.
Thickness (mm)
8870370
2,12
8870371
2,07
8870372
2,02
8871536
1,97
8871537
1,92
8871538
1,87
8871539
1,82
8871540
1,77
3. Fit the circlip using circlip pliers.
4. Invert the layshaft assembly and fit the heated
rear taper roller bearing inner race onto the shaft.
Make sure the bearing is fully home using a suit-
able mandrel.
Circlips are available in the following sizes and Part
Numbers.
Содержание Roadranger TRSM4106
