![background image](http://html1.mh-extra.com/html/eaton/roadranger-trsm4106/roadranger-trsm4106_service-manual_2353178085.webp)
5/01
4/50
35. Install the bearings and bearing spacer into the
reverse idler gear and locate the assembled gear
between the thrust washers and into mesh with the
layshaft and the mainshaft reverse gear.
Note:
Ensure tab of thrust washer locates into
recess of case.
36. Ensure the thrust washers and the gear are
correctly positioned and that the parallel groove pin
holes are in alignment and install the reverse idler
gear shaft, with a new ’O’ ring into the case. Take
care to ensure that the components are not dis-
lodged as the shaft is driven home with a soft mal-
let.
Reverse Idler Gear Assembly
Reverse Idler - Old Design
1. Thrust washer
2. Needle roller bearing
3. Spacer
4. Reverse idler gear
5. Thrust washer
6. Reverse idler shaft (old design)
7. Pin
8. ’O’ ring
9. Reverse idler shaft (new design)
34. Apply petroleum jelly to the reverse idler gear
thrust washer and locate it into position in the
transmission case.
Note:
Ensure tab of thrust washer locates into
recess of case.
37. Align the pin holes and install a new parallel
groove pin. Drive in until flush.
Содержание Roadranger TRSM4106
