![background image](http://html1.mh-extra.com/html/eaton/roadranger-trsm4106/roadranger-trsm4106_service-manual_2353178056.webp)
5/01
4/21
8. Lubricate the 3rd gear synchroniser flange and
then fit the synchroniser ring.
9. Heat the 3rd /4th -gear synchroniser hub to 85¡
Centigrade. Fit the synchroniser hub over the
splines on the mainshaft ensuring that the large
slots in the synchroniser hub align with the large
shoulders on the synchroniser ring. Press the syn-
chroniser fully home.
10. Check that the 3rd gear end float is within the
tolerance stated in the chart.
11. Assemble the three springs and plungers into
the synchroniser hub. Place the synchroniser
sleeve over the synchroniser hub and support it
with the internal groove just above the synchronis-
er hub. Position the three rollers as shown, resting
on the heads of the plungers, and press downward
on the synchroniser sleeve. This compress the
springs allowing the synchroniser sleeve to cen-
tralise in the neutral position.
12. Place the 4th gear synchroniser ring onto the
synchroniser assembly ensuring that the shoulders
on the synchroniser ring locate into the slots of the
synchroniser hub. Lubricate the synchroniser ring.
13. Fit the 4th speed gear assembly. Lubricate the
needle roller bearing and then install it into the
gear.
Содержание Roadranger TRSM4106
