![background image](http://html1.mh-extra.com/html/eaton/roadranger-trsm4106/roadranger-trsm4106_service-manual_2353178059.webp)
5/01
4/24
28. Check that the 1st speed gear is within the
specified tolerance stated in the chart.
29. Fit the reverse gear needle roller bearing.
Lubricate the bearing and then fit the reverse gear,
boss down, onto the mainshaft.
27. From the range of graded circlips select the
one which fits into the mainshaft groove with the
least amount of free play. Fit the Circlip into the
groove taking care not to damage the mainshaft
needle roller bearing surface.
24. Check that the 2nd speed gear end float is
within the tolerances stated in the chart.
25. Fit and lubricate the needle roller bearing. Fit
the 1st speed gear ensuring that the splines on the
1st speed gear engage into the splines of the syn-
chroniser flange.
26. Heat the reverse gear hub to 85¡ Centigrade
and then, with the boss uppermost, fit it onto the
splines of the mainshaft. Press the reverse gear
hub until it is fully seated.
Содержание Roadranger TRSM4106
