![background image](http://html1.mh-extra.com/html/eaton/roadranger-trsm4106/roadranger-trsm4106_service-manual_2353178042.webp)
27. Remove the speedometer drive gear or tacho-
graph rotor and the bearing spacer from the rear
case half.
28. Invert the casing on the stand and using the
special tool drift out the mainshaft rear bearing. Do
not allow the bearing to fall to the floor.
5/01
4/7
24. Lift off the input shaft with 6th gear flange.
Remove the 6th gear synchroniser ring.
25. Raise the hoist and lift out the mainshaft and
selector shaft and forks as an assembly. Carefully
lower on to a clean bench and remove the special
tool. Separate the selector shaft and forks from the
mainshaft.
23. Lift out the layshaft
26. Invert the rear case on the stand and remove
the capscrews securing the speedometer housing.
Note the positions of the different length cap-
screws. Remove the housing. If necessary drift out
the oil seal.
Содержание Roadranger TRSM4106
