![background image](http://html1.mh-extra.com/html/eaton/roadranger-trsm4106/roadranger-trsm4106_service-manual_2353178054.webp)
5/01
4/19
j) While holding the parts firmly together, measure
the clearance between the synchroniser ring and
synchroniser flange using feeler gauges at several
points around the circumference as shown. The
clearance should be between 0,5 and 1,9 mm. If
the measured dimension is outside these toler-
ances then the synchroniser assembly must be
changed.
k) Refer to paragraphs twelve to fifteen of the
assembly procedure in the section 1st /2nd speed
synchroniser assembly .
l) Invert the synchroniser assembly and repeat the
process.
Note:
The synchroniser flanges, apart from those
fitted to the 1st and 2nd speed gears, must be loc-
tited to the gears.
1. Place the retaining tool, boss uppermost, on to a
suitable surface.
2. Place the 1st /2nd speed synchroniser assembly
onto the retaining tool ensuring that the chamfer on
the synchroniser sleeve is uppermost.
Reassembly
3. Heat the assembly to 85¡ Centigrade and then
place the retaining tool and synchroniser assembly
onto the press table.
Содержание Roadranger TRSM4106
