www.abelko.se
IMSE
UltraBase40
Welcome to Ultra!
All users of this product must carefully read the manual and take
necessary safety precautions.
Safety instructions
If the product is not used as intended its protection and safety functions may
not work.
Installation
The unit is to be mounted on a DIN rail in a locked cabinet. Installation is
carried out by a qualified electrician. Cables must be fastened and secured so
that no risk for injury or fire exists. Ventilation openings in the devise housing
may not be covered.
A circuit breaker shall be installed close to the unit and its power supply.
Function and position shall be clearly labelled. External voltage source
connected to
DIGITAL OUT
must be limited to a maximum of 0.5 A.
The equipment must be unplugged from the mains and other possibly
dangerous voltage sources during installation and service.
Quick start guide
