Eaton LINX, Руководство по установке

Страница: 39 / 123

R e t r o f i t K i t
N o v a ( c o n t . )
86270LX
MONITOR SUPPORT INSTALLATION
NOTE : The Monitor Support adjusts three ways - for
height, angle and forward/backward. Adjust it
so that you have a comfortable viewing angle
of the monitor when you’re in a normal work-
ing position.
1. The Monitor Support is installed using the plastic
Tracking Blocks . See Figure 8 , detail a. For stan-
dard size monitors, a good starting point is nine bars
down (rest the bottom of a Tracking Block on the
ninth bar down from the top) and seven bars up (rest
the bottom of a Tracking Block on the seventh bar
from the bottom).
NOTE : Do not install the
security screws at this time.
2. With the assistance of another person, lower the
monitor through the viewport opening while allowing
wires to feed through the back of the Monitor Sup-
port.
3. To make angle adjustments, move either the top
or bottom Tracking Blocks independently of each
other. For height adjustments, move both bottom and
top Tracking Blocks. To adjust the viewing distance,
simply slide the Monitor Support forward or back-
ward. When the adjustments are completed, install
the #6AB x 5/8” Security screws. See
Figure 8 .
4. Carefully install the
Viewport Glass into the view-
port opening.
technical furniture
Figure 8
Retrofit assembly
#6AB x 5/8”
security screw
Tracking block
Monitor support
Detail a
Upper tracking
block
Lower tracking
block
A-32