Eaton LINX, Руководство по установке

Страница: 109 / 123

W h i t e , P e g A n d
B i n B o a r d s
( c o n t . )
Figure 2
White, Peg or Bin board panel
Hooks
Mounting channel
Rectangular slot
#10-24 x 3/4” Phillips
pan head thread
forming
2. Attach the Board panel to the Mounting
Channels by inserting the panel hooks into the
rectangular slots in the Mounting Channels. See
Figure 2 .
Ensure that the Board panel is fully seated onto the
Mounting Channels. Use a flat blade screwdriver as a
lever or a plastic mallet as required.
3. Lock the Board in place by installing two #10-24 x 3/4”
Phillips pan head thread forming screws into the bottom
of the panel. See
Figure 2 .
IMPORTANT
The panel must be fully seated prior to installation
of the screws.
NOTE : Use only Dry Erase markers on the White
Board surface that erase with a dry cloth or
eraser.
It may be necessary to use a cleaner to periodi-
cally clean the board and to fully erase certain
markers.
Optional
Marker Trays are available. Refer-
ence the Wright Line Spec. Guide.
85089
technical furniture
E-9