Eaton LINX, Руководство по установке

Страница: 81 / 123

C o r n e r W o r k s t a t i o n
O r g a n i z e r
1. Using the cardboard Drill Template provided, drill two
1/8” diameter holes approximately 1/2” deep into the
two corners of the Linx Corner Workstation as shown
in
Figure 1 .
Carefully fold the template along perforations and place
the template on the corner of the worksurface as shown
in
Figure 2 .
Fold the tab on the opposite end of the template for the
other corner of the worksurface.
Tools Required
-Phillips head screwdriver
-5/32” Allen wrench (provided)
-Electric drill
-1/8” Drill bit
-Drill template (provided)
Corner Workstation Organizer
Figure 1
1/8” diameter
holes
Corner workstation
80955
technical furniture
Drill template
Corner of worksurface
Perforations
Figure 2
D-14