Eaton LINX, Руководство по установке

Страница: 34 / 123

W o r k s t a t i o n C a b l e
M a n a g e m e n t
Tools Required
- None
Cable management is an intergral element of each
Linx Workstation.
* 2” x 2” Cable Ports in laminate tops
*
Modesty Panels with “stepped” design for horizontal
cable runs.
* Removable
Power Ring Cable Retainers in Mod-
esty Panels.
* Removable
Wire Covers attach to legs.
* Self adhering
Cable Clips .
CABLE PORTS
2” x 2”
Cable Ports are located in the workstation top
to route cables and wires to the Horizontal Raceway
area of the Modesty Panels. See
Figure 1 .
MODESTY PANEL/CABLE RETAINERS
The Modesty Panels incorporate a “stepped” design to
provide a raceway for running cables horizontally and
to exit at the rear to the
Wire Covers attached to the
supporting legs.
Cable Retainers are factory installed and are designed
to run larger cables along the bottom section and the
smaller data/communications wires in the upper section.
See
Figure 2 .
Cable Retainers are removable. See
Figure 2 . Addition-
al retainers are available. (Order separately).
Workstation Cable Management
Cable ports
Removable Wire
covers
Modesty panel w/cable
management
Figure 1
2” x 2” Cable port
Snap-out
cover
Figure 2
Modesty panel
Area for smaller
dia. wiring
Large cable area
Cable retainer
Rotate 90 degrees
and lift to remove
Dimple in Modesty
panel
Exit to leg
84566
technical furniture
A-27