manualshive.com logo in svg

Eaton LINX, Руководство по установке

Поделиться
Скачать
Eaton LINX Скачать руководство пользователя страница 2

2

LINX 

Installation Manual

LINX INSTALLATION MANUAL

         Eaton.com/LINX

DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY

The information, recommendations, descriptions and safety notations in this document are based on Eaton Corporation’s 

(“Eaton”) experience and judgment and may not cover all contingencies. If further information is required, an Eaton sales 

office should be consulted. Sale of the product shown in this literature is subject to the terms and conditions outlined in 

appropriate Eaton selling policies or other contractual agreement between Eaton and the purchaser.
THERE ARE NO UNDERSTANDINGS, AGREEMENTS, WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES 

OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, OTHER THAN THOSE SPECIFICALLY SET OUT IN ANY 

EXISTING CONTRACT BETWEEN THE PARTIES. ANY SUCH CONTRACT STATES THE ENTIRE OBLIGATION OF EATON. THE 

CONTENTS OF THIS DOCUMENT SHALL NOT BECOME PART OF OR MODIFY ANY CONTRACT BETWEEN THE PARTIES. 
In no event will Eaton be responsible to the purchaser or user in contract, in tort (including negligence), strict liability or 

otherwise for any special, indirect, incidental or consequential damage or loss whatsoever, including but not limited to damage or 

loss of use of equipment, plant or power system, cost of capital, loss of power, additional expenses in the use of existing power 

facilities, or claims against the purchaser or user by its customers resulting from the use of the information, recommendations and 

descriptions contained herein. The information contained in this manual is subject to change without notice. 

LINX

®

Modular Furniture

Introduction

Congratulations on your purchase of 

Eaton

’s LINX

™ 

Modular Furniture. LINX

 

is flexible technical

 

furniture 

designed to address people and technology in today’s office place. All LINX

 

products are designed

 

and 

manufactured to the highest industry standards to last a lifetime.

HOW TO USE THIS INSTALLATION MANUAL

This manual includes, but is not limited to, the installation instructions for the following products: LINX

Worksurfaces, LINX Organizers, and TechOrganizers. Please keep in mind that the selective products

(such as keyboards, monitor arms, etc.) ship with their respective installation instructions, and therefore,

are not included in this manual.

Product specifications are subject to change without notice

LINX

™

 Modular Furniture 

Introduction

Содержание LINX




























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды