SamsGazebos
○
R
Japanese Myojin Style Torii Gate
Assembly Instructions & Installation Guide
T e mp o -
r a r y
w o o d
Board
Bottom KASAGI
(3)
Four KUSABI (6)
NUKI
(2)
Top KASAGI
(5)
Two
GAKUZUKA (4)
Two Cement
Frames (7)
Thank you for purchasing a Japanese Myojin Style Torii Gate from SamsGazebos. Assembling it may take 45 minutes and an
hour to set with cement. Minimum two persons are recommended to assemble this item for your safety. Please work on a
clean level floor for the best result. Remove the wrapping material, prepare the tools and material, and lay out the parts before
assembly in order to save you time and effort. Each kit is custom built with pilot holes for your convenience. Wash hands after
handling. Handle with care; poles are round and heavy.
Tools / things you need:
◇
Cordless Screw Driver or Philips Screw )
◇
Socket Wrench
◇
2 Hammers
◇
Level
◇
Ladder
◇
Square
◇
Knife
◇
Pencil / Pen
◇
Measure Tape
◇
Shovel
◇
Minimum 4 bags of ready mix cement (Get extra bags of cement for large holes.)
◇
Wheelbarrow or container to mix cement
◇
Water
◇
Nitrile Gloves (included)
◇
2 Strings (included)
◇
Hardware (two 1/2” x 8”lag bolts with washers, 4 large screws (2-1/2”), 22 small screws (1-5/8”)(included)
1 HASHIRA
2
3
5
4
6
7
Made in the USA
