Installing the Ergonomic Workstation
Install User Surface and Components
Follow these instructions to install the user surface and components.
Attach User Surface
Follow these instructions to attach the user surface to the support frame.
1. Align the pre-drilled holes in the bottom of the user surface with the openings in the
support frame.
2. Insert the Phillips head wood screws (62071) and tighten. The number of screws may
vary depending on the lift size.
Step
User
Surface
Support Frame
Step
Step
(Screw Qty
Varies)
25
Eaton Profile Genesys Dual-Lift Ergonomic Workstation Installation www.eaton.com/powerquality 11-41 06-2011
