Installing the Ergonomic Workstation
7.
Level and align the lower frame, then tighten all inserted screws in the sequence noted here and
illustrated below.
8. Tighten four (4) screws on the leg assemblies (DL6).
9. Tighten two (2) side screws on lift column (DL2). Ensure unit is properly aligned, level and plumb
90 degrees to all lifts and legs.
10. Tighten one front screw on the lift column (DL2).
Step
Step
(4x)
Step
(2x)
Step
(1x)
Step
wwww.eaton.com/powerquality 11-41 06-2011
Eaton Profile Genesys Dual-Lift Ergonomic Workstation Installation 18