81
ARCON 3G
ARCON 3G MANUAL
MN026015EN October 2020 www.eaton.com
Event Logger File (ELF)
Event Logger File (ELF)
Parameter Change Log (PCL)
Parameter Change Log (PCL)
Every event is captured by Event logger and stored into ELF file. Maximal number of
events which can be stored is 100. User can see event log on the external HMI display,
or to download ELF file from parameter tool.
Every event is captured by Event logger and stored into ELF file. Maximal number of
events which can be stored is 100. User can see event log on the external HMI display,
or to download ELF file from parameter tool.
Every parameter change is captured by Parameter change log and stored into PCL
file. Maximal number of parameter changes which can be stored is 100. User can
see parameter change log on the external HMI display, or to download PCL file from
parameter tool.
Every parameter change is captured by Parameter change log and stored into PCL
file. Maximal number of parameter changes which can be stored is 100. User can
see parameter change log on the external HMI display, or to download PCL file from
parameter tool.
Extended system supports two operation modes:
•
User mode (default)
•
User protected mode (with password)
The operation mode can be changed from:
•
Display module
•
Parameter tool (APPT)
After initial power on the extended system is in user mode and all read and write
functions for parameters, history and change logs are enabled. If P-No. 2220 “Security” is
set to Enable, all write functions on the HMI display will be disabled for the User mode.
When P-No. 2220 “Security” is set to Enable the user can only change parameters and
delete history and change logs with password.
Password is using PIN in the range from 10000-99999 (P-No. 2221). The timeout timer
(P-No. 2225) is reset after each user input after the set time (60…65535s).
The password can be always changed by APPT software.
Operation modes (Security)
User mode
User protected mode
Proof 1 — October 29, 2020 3:00 PM
