20
ARCON 3G
ARCON 3G MANUAL
MN026015EN October 2020 www.eaton.com
System error
More than one system error may occur in the system. All system errors will be
written in the Event logger and each of them must be acknowledged by user in
chronological order.
Error codes are presented as
E.XX
1
If user presses and holds INFO button
following additional information are alternately shown at intervals of 2 seconds:
•
Affected module
M .XX
2
•
Affected sensor
S .XX
3
When user releases INFO button the error code is shown again. User can
acknowledge the displayed system error by pressing ACK button.
TRIP
Trip is presented by event
“T.13”.
The TRIP event is written in the Event logger and
must be acknowledged by user. If user presses and holds INFO button following
additional information are alternately shown at intervals of 2 seconds:
Affected module
M.XX
4
Affected sensor
S.XX
5
ACK ALL alarms
To acknowledge all active alarms in the list, using only one command over internal HMI,
follow the next steps:
•
Press and hold the ACK button.
•
After 2s the segment display will show text: “ACK”.
•
Then release the ACK button and all possible alarms will be acknowledged.
ote:
N
An alarm can be acknowledged only if its source is already deactivated.
1
XX = EVENT NUMBER
2
XX = MODULE ADDRESS
3
XX = SENSOR NUMBER
