Eastey EA Professional Series, Руководство пользователя

Страница: 40 / 70

40 Operation
Running One Product at a Time
1. Place the product on the infeed conveyor, lining it up with the rear edge of the
infeed conveyor.
2. Push the green palm button on the infeed conveyor.
3. Carefully watch the sequence of operations as the product goes through the
complete cycle of operations, including sealing.
4. After product is sealed, both conveyors will remain off until the green button is
pressed again or the “Conveyor Start” button is touched on the operator’s panel.
Product Indexing
This equipment has product indexing. There must be a gap in between packages. If a
package is being sealed and the photo eye senses a package, the infeed conveyor will
stop. As soon as the seal head starts to open, the infeed conveyor starts. The eye is
adjustable and needs to be directed away from the seal bar to ensure the package on
the infeed does not run into the seal bar while opening.
1" Clearance
Exit Infeed
Package
Product
1"
D = ½ × H
Package
Transverse Direction
Centerline of
Seal / Cutter Arm
H=
D
D = ½ × H
D
Package
Product
Direction
Conveyor